New insights into the genetic loci related to egg weight and age at first egg traits in broiler breeder.

Egg weight (EW) and age at first egg (AFE) are economically important traits in breeder chicken production. The genetic basis of these traits, however, is far from understood, especially for broiler breeders. In this study, genetic parameter estimation, genome-wide association analysis, meta-analysis, and selective sweep analysis were carried out to identify genetic loci associated with EW and AFE in 6,842 broiler breeders. The study found that the heritability of EW ranged from 0.42 to 0.44, while the heritability of AFE was estimated at 0.33 in the maternal line. Meta-analysis and selective sweep analysis identified two colocalized regions on GGA4 that significantly influenced EW at 32 wk (EW32W) and at 43 wk (EW43W) with both paternal and maternal lines. The genes AR, YIPF6, and STARD8 were located within the significant region (GGA4: 366.86-575.50 kb), potentially affecting EW through the regulation of follicle development, cell proliferation, and lipid transfer etc. The promising genes LCORL and NCAPG were positioned within the significant region (GGA4:75.35-75.42 Mb), potentially influencing EW through pleiotropic effects on growth and development. Additionally, 3 significant regions were associated with AFE on chromosomes GGA7, GGA19, and GGA27. All of these factors affected the AFE by influencing ovarian development. In our study, the genomic information from both paternal and maternal lines was used to identify genetic regions associated with EW and AFE. Two genomic regions and eight genes were identified as the most likely candidates affecting EW and AFE. These findings contribute to a better understanding of the genetic basis of egg production traits in broiler breeders and provide new insights into future technology development.

Major Depressive Disorder Prediction Based on Sleep-Wake Disorders Symptoms in US Adolescents: A Machine Learning Approach from National Sleep Research Resource.

Background: There is substantial evidence from previous studies that abnormalities in sleep parameters associated with depression are demonstrated in almost all stages of sleep architecture. Patients with symptoms of sleep-wake disorders have a much higher risk of developing major depressive disorders (MDD) compared to those without. Objective: The aim of the present study is to establish and compare the performance of different machine learning models based on sleep-wake disorder symptoms data and to select the optimal model to interpret the importance of sleep-wake disorder symptoms to predict MDD occurrence in adolescents. Methods: We derived data for this work from 2020 to 2021 Assessing Nocturnal Sleep/Wake Effects on Risk of Suicide Phase I Study from National Sleep Research Resource. Using demographic and sleep-wake disorder symptoms data as predictors and the occurrence of MDD measured base on the center for epidemiologic studies depression scale as an outcome, the following six machine learning predictive models were developed: eXtreme Gradient Boosting model (XGBoost), Light Gradient Boosting mode, AdaBoost, Gaussian Naïve Bayes, Complement Naïve Bayes, and multilayer perceptron. The models' performance was assessed using the AUC and other metrics, and the final model's predictor importance ranking was explained. Results: XGBoost is the optimal predictive model in comprehensive performance with the AUC of 0.804 in the test set. All sleep-wake disorder symptoms were significantly positively correlated with the occurrence of adolescent MDD. The insomnia severity was the most important predictor compared with the other predictors in this study. Conclusion: This machine learning predictive model based on sleep-wake disorder symptoms can help to raise the awareness of risk of symptoms between sleep-wake disorders and MDD in adolescents and improve primary care and prevention.

Impact of army morale on suicidal ideation: The mediating role of grit and the moderating role of social support in a Chinese Navy population.

This study constructed a moderated mediation model to examine whether increased army morale could reduce suicidal ideation. The mediating role of grit and the moderating role of social support were also examined. A total of 1029 male navy cadets in China were recruited to complete the survey. The measures used in the study included the Army Morale Scale, Grit Scale, Social Support Scale, and Self-rated Idea of Suicide Scale. The results indicated that: increased army morale could significantly reduce suicidal ideation; the impact of army morale on suicidal ideation could be partially mediated by grit; and social support moderated the impact of army morale on suicidal ideation. Specifically, relatively higher levels of social support could reduce suicidal ideation among individuals with lower levels of army morale, but the effect is not significant when the morale is at a high level. The study revealed that increased army morale could reduce suicidal ideation. Moreover, the mediating role of grit and the moderating role of social support were also revealed.

Ferritinophagy-mediated ferroptosis of spermatogonia is involved in busulfan-induced oligospermia in the mice.

Busulfan, a bifunctional alkylated chemotherapeutic agent, has male reproductive toxicity and induce oligospermia, which is associated with ferroptosis. However, the specific target cells of busulfan-induced oligospermia triggered by ferroptosis are largely elusive, and the detailed mechanisms also require further exploration. In the present study, busulfan (0.6, and 1.2 mM, 48 h) causes ferroptosis in GC-1 spg cells through inducing Fe2+, ROS and MDA accumulation and functional inhibition of Xc-GSH-GPX4 antioxidant system. After inhibition of ferroptosis by Fer-1 (1 µM, pretreatment for 2 h) or DFO (10 µM, pretreatment for 2 h) reverses busulfan-induced destructive effects in GC-1 spg cells. Furthermore, using RNA-seq and Western blotting, we found that busulfan promotes autophagy-dependent ferritin degradation, as reflected by enriching in autophagy, increased LC3 II, Beclin1 and NCOA4, as well as decreased P62 and ferritin heavy chain 1 (FTH1). Ultimately, GC-1 spg cells and Balb/c mice were treated with busulfan and/or 3-MA, the inhibitor of autophagy. The results displayed that inhibition of autophagy relieves busulfan-induced FTH1 degradation and then blocks the occurrence of ferroptosis in GC-1 spg cells and testicular spermatogonia, which subsequently alleviates busulfan-caused testicular damage and spermatogenesis disorders. In summary, these data collectively indicated that ferroptosis of spermatogonia is involved in busulfan-induced oligospermia and mediated by autophagy-dependent FTH1 degradation, identifying a new target for the therapy of busulfan-induced male infertility.

Large-scale genomic and transcriptomic analyses elucidate the genetic basis of high meat yield in chickens.

INTRODUCTION: Investigating the genetic markers and genomic signatures related to chicken meat production by combing multi-omics methods could provide new insights into modern chicken breeding technology systems. OBJECT: Chicken is one of the most efficient and environmentally friendly livestock, especially the fast-growing white-feathered chicken (broiler), which is well known for high meat yield, but the underlying genetic basis is poorly understood. METHOD: We generated whole-genome resequencing of three purebred broilers (n = 748) and six local breeds/lines (n = 114), and sequencing data of twelve chicken breeds (n = 199) were obtained from the NCBI database. Additionally, transcriptome sequencing of six tissues from two chicken breeds (n = 129) at two developmental stages was performed. A genome-wide association study combined with cis-eQTL mapping and the Mendelian randomization was applied. RESULT: We identified > 17 million high-quality SNPs, of which 21.74% were newly identified, based on 21 chicken breeds/lines. A total of 163 protein-coding genes underwent positive selection in purebred broilers, and 83 genes were differentially expressed between purebred broilers and local chickens. Notably, muscle development was proven to be the major difference between purebred broilers and local chickens, or ancestors, based on genomic and transcriptomic evidence from multiple tissues and stages. The MYH1 gene family showed the top selection signatures and muscle-specific expression in purebred broilers. Furthermore, we found that the causal gene SOX6 influenced breast muscle yield and also related to myopathy occurrences. A refined haplotype was provided, which had a significant effect on SOX6 expression and phenotypic changes. CONCLUSION: Our study provides a comprehensive atlas comprising the typical genomic variants and transcriptional characteristics for muscle development and suggests a new regulatory target (SOX6-MYH1s axis) for breast muscle yield and myopathy, which could aid in the development of genome-scale selective breeding aimed at high meat yield in broiler chickens.

Development of an automatic measurement system using atmospheric pressure photoionization ultrahigh-resolution mass spectrometry and application for on-line analysis of particulate matter.

On-line chemical characterization of atmospheric particulate matter (PM) with soft ionization technique and ultrahigh-resolution Mass Spectrometry (UHRMS) provides molecular information of organic constituents in real time. Here we describe the development and application of an automatic measurement system that incorporates PM2.5 sampling, thermal desorption, atmospheric pressure photoionization, and UHRMS analysis. Molecular formulas of detected organic compounds were deducted from the accurate (±10 ppm) molecular weights obtained at a mass resolution of 100,000, allowing the identification of small organic compounds in PM2.5. Detection efficiencies of 28 standard compounds were determined and we found a high sensitivity and selectivity towards organic amines with limits of detection below 10 pg. As a proof of principle, PM2.5 samples collected off-line in winter in the urban area of Beijing were analyzed using the Ionization Module and HRMS of the system. The automatic system was then applied to conduct on-line measurements during the summer time at a time resolution of 2 hr. The detected organic compounds comprised mainly CHON and CHN compounds below 350 m/z. Pronounced seasonal variations in elemental composition were observed with shorter carbon backbones and higher O/C ratios in summer than that in winter. This result is consistent with stronger photochemical reactions and thus a higher oxidation state of organics in summer. Diurnal variation in signal intensity of each formula provides crucial information to reveal its source and formation pathway. In summary, the automatic measurement system serves as an important tool for the on-line characterization and identification of organic species in PM2.5.

Genomic insights into the contribution of de novo lipogenesis to intramuscular fat deposition in chicken.

INTRODUCTION: The proportion of animal based foods in daily diet of consumers is constantly increasing, with chicken being highly favored due to its high protein and low fat characteristics. The consumption of chicken around the world is steadily increasing. Intramuscular fat (IMF) is a key indicator affecting meat quality. OBJECT: High IMF content can contribute to improve the quality of chicken meat. The regulatory mechanism of IMF deposition in chicken is poorly understood, so its complete elucidation is essential to improve chicken meat quality. METHOD: Here, we performed whole genome resequencing on 516 yellow feather chickens and single-cell RNA sequencing on 3 63-day-old female JXY chickens. In addition, transcriptome sequencing techniques were also performed on breast muscle tissue of JXY chickens at different developmental stages. And 13C isotope tracing technique was applied. RESULTS: In this study, a large-scale genetic analysis of an IMF-selected population and a control population identified fatty acid synthase (FASN) as a key gene for improving IMF content. Also, contrary to conventional view, de novo lipogenesis (DNL) was deemed to be an important contributor to IMF deposition. As expected, further analyses by isotope tracing and other techniques, confirmed that DNL mainly occurs in myocytes, contributing about 40% of the total fatty acids through the regulation of FASN, using the available FAs as substrates. Additionally, we also identified a relevant causal mutation in the FASN gene with effects on FA composition. CONCLUSION: These findings contribute to the understanding of fat metabolism in muscle tissue of poultry, and provide the feasible strategy for the production of high-quality chicken meat.

Combined effect of microbially derived cecal SCFA and host genetics on feed efficiency in broiler chickens.

BACKGROUND: Improving feed efficiency is the most important goal for modern animal production. The regulatory mechanisms of controlling feed efficiency traits are extremely complex and include the functions related to host genetics and gut microbiota. Short-chain fatty acids (SCFAs), as significant metabolites of microbiota, could be used to refine the combined effect of host genetics and gut microbiota. However, the association of SCFAs with the gut microbiota and host genetics for regulating feed efficiency is far from understood. RESULTS: In this study, 464 broilers were housed for RFI measuring and examining the host genome sequence. And 300 broilers were examined for cecal microbial data and SCFA concentration. Genome-wide association studies (GWAS) showed that four out of seven SCFAs had significant associations with genome variants. One locus (chr4: 29414391-29417189), located near or inside the genes MAML3, SETD7, and MGST2, was significantly associated with propionate and had a modest effect on feed efficiency traits and the microbiota. The genetic effect of the top SNP explained 8.43% variance of propionate. Individuals with genotype AA had significantly different propionate concentrations (0.074 vs. 0.131 µg/mg), feed efficiency (FCR: 1.658 vs. 1.685), and relative abundance of 14 taxa compared to those with the GG genotype. Christensenellaceae and Christensenellaceae_R-7_group were associated with feed efficiency, propionate concentration, the top SNP genotypes, and lipid metabolism. Individuals with a higher cecal abundance of these taxa showed better feed efficiency and lower concentrations of caecal SCFAs. CONCLUSION: Our study provides strong evidence of the pathway that host genome variants affect the cecal SCFA by influencing caecal microbiota and then regulating feed efficiency. The cecal taxa Christensenellaceae and Christensenellaceae_R-7_group were identified as representative taxa contributing to the combined effect of host genetics and SCFAs on chicken feed efficiency. These findings provided strong evidence of the combined effect of host genetics and gut microbial SCFAs in regulating feed efficiency traits. Video Abstract.

Buried-Interface Engineering Enables Efficient and 1960-Hour ISOS-L-2I Stable Inverted Perovskite Solar Cells.

High-performance perovskite solar cells (PSCs) typically require interfacial passivation, yet this is challenging for the buried interface, owing to the dissolution of passivation agents during the deposition of perovskites. Here, this limitation is overcome with in situ buried-interface passivation-achieved via directly adding a cyanoacrylic-acid-based molecular additive, namely BT-T, into the perovskite precursor solution. Classical and ab initio molecular dynamics simulations reveal that BT-T spontaneously may self-assemble at the buried interface during the formation of the perovskite layer on a nickel oxide hole-transporting layer. The preferential buried-interface passivation results in facilitated hole transfer and suppressed charge recombination. In addition, residual BT-T molecules in the perovskite layer enhance its stability and homogeneity. A power-conversion efficiency (PCE) of 23.48% for 1.0 cm2 inverted-structure PSCs is reported. The encapsulated PSC retains 95.4% of its initial PCE following 1960 h maximum-power-point tracking under continuous light illumination at 65 °C (i.e., ISOS-L-2I protocol). The demonstration of operating-stable PSCs under accelerated ageing conditions represents a step closer to the commercialization of this emerging technology.

Nontarget Screening of Novel Urinary Biomarkers for Occupational Exposure to Toxic Chemicals from Coking Industry Using HPLC-QTOF-MS.

High-resolution mass spectrometry is an advanced technique for comprehensive screening of toxic chemicals. In this study, urine samples were collected from both an occupationally exposed population at a coking site and normal inhabitants to identify novel urinary biomarkers for occupational exposure to coking contaminants. A coking-site-appropriate analytical method was developed for unknown chemical screening. Through nontarget screening, 515 differential features were identified, and finally, 32 differential compounds were confirmed as candidates for the current study, including 13 polycyclic aromatic hydrocarbon (PAH) metabolites. Besides monohydroxy-PAHs (such as 1-&2-naphthol, 2-&9-hydroxyfluorene, 2-&4-phenanthrol, and 1-&2-hydroxypyrene), many other PAH metabolites including dihydroxy metabolites, PAH oxide, and sulfate conjugate were detected, suggesting that the quantification based solely on monohydroxy-PAHs significantly underestimated the human exposure to PAHs. Furthermore, several novel compounds were recognized that could be considered as biomarkers for the exposure to coking contaminants, including quinolin-2-ol (1.10 ± 0.44 ng/mL), naphthylmethanols (11.4 ± 5.47 ng/mL), N-hydroxy-1-aminonaphthalene (0.78 ± 0.43 ng/mL), hydroxydibenzofurans (17.4 ± 7.85 ng/mL), hydroxyanthraquinone (0.13 ± 0.053 ng/mL), and hydroxybiphenyl (2.70 ± 1.03 ng/mL). Despite their lower levels compared with hydroxy-PAHs (95.1 ± 30.8 ng/mL), their severe toxicities should not be overlooked. The study provides a nontarget screening approach to identify chemicals in human urine, which is crucial for accurately assessing the health risks of toxic chemicals in the coking industry.

Exposure to polycyclic aromatic hydrocarbons (PAHs) in outdoor air and respiratory health, inflammation and oxidative stress biomarkers: A panel study in healthy young adults.

Exposure to polycyclic aromatic hydrocarbons (PAHs) can be associated with different types of health effects. However, the systemic changes of health effects between fluctuations of PAHs exposure have not been established. In this study, urinary hydroxylated PAHs (OH-PAHs) and 12 biomarkers were determined among 36 students from the urban to the suburb in Taiyuan in 2019. The concentration of Σ12OH-PAHs in urban areas (28.2 and 21.4 µg/g Cr) was significantly higher than that in suburban area (16.8 µg/g Cr). The regression showed that hydroxy-phenanthrene (OH-Phe, 1/2/3/4/9-OH-Phe) was significantly positively correlated with lung function (PEF25 and PEF50), 8-hydroxydeoxyguanosine (8-OHdG), interleukin-8 (IL-8), and fractional exhaled nitric oxide (FeNO). Moreover, there were negative associations of 2-hydroxyfluorene (2-OH-Flu) with FVC and FEV1. 1 unit increase of 1-hydroxypyrene (1-OH-Pyr) was negatively associated with 18.8% FVC, 17.3% FEV1, and 26.4% PEF25 in the suburban location, respectively. During urban2, each unit change of 2-OH-Flu was associated with 10.9% FVC and 10.5% FEV1 decrease, which were higher than those in suburban location. 8-OHdG decreased by 32.0% with each unit increase in 3-hydroxyfluorene (3-OH-Flu) during urban2 (p < 0.05), while 1.9% in the suburban location. During the suburban period, the increase in OH-Phe was correlated with the decrease in malondialdehyde (MDA). The respiratory damage caused by PAHs in the urban disappeared after backing to the urban from the suburban area. Notably, despite the total significant liner mixed regression association of FeNO with multiple OH-PAHs, the association of FeNO with OH-PAHs was not significant during different periods except for 2-OH-Flu. Our findings suggested that short-term exposure to different concentrations of PAHs might cause changes in health effects and called for further research to investigate possible alterations between health effects and PAH exposure.

Meta theories of technological innovation based on the analysis of classic texts.

This study aims to investigate the classification of technological innovation meta-theories based on classical texts, as well as the relationships between various classifications. Both qualitative and quantitative methods are employed. From the perspective of technological innovation, using scientometric methods, 105 pieces of classic texts from the 1930s-2010s are extracted from the references of 3862 pieces of high-quality literature from the 1900s-2020s. As a result, based on a combination of qualitative data analysis and topic model analysis, we developed a typology with eight meta-theories of technological innovation, including performance-based, resource-based, knowledge-based, capability-based, network-based, technological-innovation-system, dual-innovation, and dynamic-sustainability views. Then we analyzed 1) the evolution, reification, and confusion relationships between different meta-theories; 2) the causes of technological innovation's concept jungle; and 3) an integrated framework of technological innovation meta-theories. This study analyzed the benefits of the meta-theoretical analysis on the future study of technological innovation. Additionally, the results of this study can help to measure technological innovation, construct new theories, and improve the efficiency of the connection between the practical problems of innovation and potentially useful theoretical frameworks.

Distribution of phthalate metabolites, benzophenone-type ultraviolet filters, parabens, triclosan and triclocarban in paired human hair, nail and urine samples.

In this study, the distribution of nineteen ingredients of personal care product (PCPs), including seven metabolites of phthalates (mPAEs), five benzophenone-type ultraviolet filters (BPs), and seven antimicrobial agents (AAs), were investigated in paired human hair, nail and urine samples. The median concentrations of ΣmPAEs, ΣBPs and ΣAAs were 135, 2.76 and 179 ng/g in hair, 37.3, 2.95 and 297 ng/g in nails, and 345, 4.03 and 50.1 ng/mL in urine, respectively. Mono-methyl phthalate (49%), 2,4-dihydroxybenzophenone (45%) and triclosan (71%) were the most abundant mPAE, BP and AA in hair samples, respectively, and had similar abundance in nail samples. In contrast, mono-n-butyl phthalate (45%), 4-hydroxy benzophenone (29%) and methyl paraben (54%) were the predominant mPAE, BP and AA in urine samples, respectively. Significant differences in the concentrations of some target compounds were observed between male and female but inconsistent across different matrices. Moreover, most compounds with significant correlations had quite different correlation coefficients in each matrix. No significant correlations were found between hair, nail and urine samples for most of the target analytes. These results suggest these analytes have matrix-specific distribution, and it is necessary to use multiple matrices to comprehensively assess the risk of ingredients of PCPs to human health.

Pancancer Analysis Revealed the Value of RAC2 in Immunotherapy and Cancer Stem Cell.

Objective: To investigate the oncogenic effect and clinical significance of RAC2 in pancarcinoma from the perspective of tumor immunity and cancer stem cell. Methods: After in-depth mining of TCGA, GEO, UCSC, and other databases, basic information of the RAC2 gene and its expression in tumor tissues as well as the relationship between RAC2 and tumor were analyzed based on survival, mutation, immune microenvironment, tumor stemness, and enrichment analysis on related pathways. Results: RAC2 mRNA expression was increased in most tumor tissues and was associated with their prognosis. Compared to normal tissues, the RAC2 mutation rate was higher in patients with skin melanoma, uterine sarcoma, and endometrial cancer. RAC2 had a strong relation with immune cell infiltration, immunomodulators, immunotherapy markers, cancer stem cell of THYM, and immune-related pathways. Conclusions: This study explored the potential importance of RAC2 in the prognosis, immunotherapy, and cancer stem cell of 33 cancers, laying the foundation for mechanistic experiments and its future application in clinical practice. However, the results using bioinformatics methods could be affected by the differences in patients across databases. Thus, the present results were preliminary and required further experimental validation.

Coordinated encapsulation by ß-cyclodextrin and chitosan derivatives improves the stability of anthocyanins.

To improve the stability of anthocyanins (ACNs), ACNs were loaded into dual-encapsulated nanocomposite particles by self-assembly using ß-cyclodextrin (ß-CD) and two different water-soluble chitosan derivatives, namely, chitosan hydrochloride (CHC) and carboxymethyl chitosan (CMC). The ACN-loaded ß-CD-CHC/CMC nanocomplexes with small diameters (333.86 nm) and had a desirable zeta potential (+45.97 mV). Transmission electron microscopy (TEM) showed that the ACN-loaded ß-CD-CHC/CMC nanocomplexes had a spherical structure. Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (1H NMR) and X-ray diffraction (XRD) confirmed that the ACNs in the dual nanocomplexes were encapsulated in the cavity of the ß-CD and that the CHC/CMC covered the outer layer of ß-CD through noncovalent hydrogen bonding. The ACNs from the dual-encapsulated nanocomplexes improved stability of ACNs under adverse environmental conditions or in a simulated gastrointestinal environment. Further, the nanocomplexes exhibited good storage stability and thermal stability over a wide pH range when added into simulated electrolyte drinks (pH = 3.5) and milk tea (pH = 6.8). This study provides a new option for the preparation of stable ACNs nanocomplexes and expands the applications for ACNs in functional foods.

[Regularities of acupoint compatibility and application characteristics of methods of needling and moxibustion in the treatment of ankle sprain based on complex network analysis].

OBJECTIVE: To analyze the compatibility regularities of acupoints and the application characteristics of needling-moxibustionmethods in the treatment of ankle sprain by using complex network technology, so as to provide the basis and treatment ideas. METHODS: The clinical research articles on acupuncture treatment of ankle joint sprain published from November 2011 to November 2021 were retrieved from databases of CNKI, Wanfang Data knowledge service platform, VIP information Chinese journal service platform and PubMed by using key words of "acupuncture""moxibustion" "acupuncture and moxibustion" "ankle injury" "ankle sprain" "injured ankle" and "syndesmotic injuries". After screening these articles according to our inclusion and exclusion criteria, a database of acupuncture treatment of ankle sprain was established. Then, analysis on the occurrence frequency of acupoints and their related meridians, and methods of needling manipulation, and the association rule analysis (quantitative analysis) about the closeness between acupoints, and the degree of support and confidence coefficient were conducted for acquiring the acupoint combinations with higher correlation in the compatibility using Apriori algorithm after modeling (with IBM SPSS Modeler18.0 software). Gephi 0.9.2 software was used to make complex network analysis, for which "k-core hierarchical analysis" and "community analysis" were used as the methods to analyze the network structure of acupoints, and the confidence value was used as the index to measure the importance of acupoints. RESULTS: A total of 201 articles meeting the criteria were collected, including 196 articles in Chinese and 5 in English. A total of 236 acupuncture prescriptions were extracted, involving 61 acupoints, with a total frequency of occurrence being 846. The top 10 acupoints were Ashi point, Kunlun (BL60), Jiexi (ST41), Qiuxu (GB40), Shenmai (BL62), Yanglingquan (GB34), Taixi (KI3), Zhaohai (KI6), Xuanzhong (GB39) and Shangqiu (SP5), with the occurrence frequency being 109, 79, 70, 68, 63, 59, 53, 52, 37 and 34, respectively. The results of descriptive analysis showed that the top 5 meridians were Gallbladder Meridian of Foot-shaoyang, Bladder Meridian of Foot-taiyang, Kidney Meridian of Foot-shaoyin, Stomach Meridian of Foot-yangming and Spleen Meridian of Foot-taiyin, with the frequency being 181, 153, 116, 105 and 53, respectively. Complex network analysis displayed that after "k-core hierarchical analysis" and "Community division", two communities were reserved, mainly involving 15 core acupoints such as Ahshi point, GB40, ST14, BL62, GB34, KI6, BL60, KI3, GB39, Zusanli (ST36), SP5; Taichong (LR3), Zulinqi (GB41), Sanyinjiao (SP6) and Rangu (KI2). The results of association rule analysis showed that the most relevant acupoint combination is "BL60-ST41" (support degree 34.83％), followed by "BL60-KI3" (support degree 26.37%), reflecting the principle of selection of local acupoint for ankle sprain. The therapeutic methods are filiform needle acupuncture, and the reducing technique and uniform reinforcing and reducing manipulation are the most commonly used approaches, but the reinforcing method is rarely used. CONCLUSION: In the treatment of ankle sprain, local acupoints and Ashi points are mainly used, in combination with reducing or uniform reinforcing and reducing manipulations, as well as the method of needling and moxibustion, which provides a good reference for clinical practice.

Integration of solid-phase microextraction and surface-enhanced Raman spectroscopy for in-vivo screening of polybrominated diphenyl ether.

The monitoring of polybrominated diphenyl ethers (PBDEs) is of great significance owing to their high persistence, bioaccumulation, and toxicity to humans and animals. In this study, a sensitive and reproducible probe that integrates solid-phase microextraction and surface-enhanced Raman spectroscopy (SPME-SERS) was developed for screening PBDEs in multiphase specimens, including live fish, water, and electrical products. A roughed Cu fiber with an Ag layer was fabricated with dual functions. BDE-15 was readily extracted and detected on the SPME-SERS probe consisting of propanethiol-modified Ag nanoplates on a Cu wire. A clear linear relationship (R2 = 0.988) was established between the SERS intensity at 782 cm-1 and the logarithmic concentrations (from 100 ppb to 100 ppm), with a detection limit of 15 ppb. This proposed method enables continuous in vivo monitoring in fish without complicated pretreatments. The results obtained by this SPME-SERS approach were validated by high-performance liquid chromatography and showed good agreement. This "extracting and detecting" SPME-SERS method provides a potential tool to monitor the occurrence, formation, and migration of PBDEs.

Rapid identification and quantification of diquat in biological fluids within 30 s using a portable Raman spectrometer.

Rapid detection of diquat (DQ) is essential in clinical diagnosis and rescue. Here, we developed a fast, simple-yet-practical detection strategy for the reliable identification and quantification of DQ in biological fluids. Based on surface-enhanced Raman spectroscopy (SERS), point-of-care detection was realized under the acidic condition with gold nanoparticles as the substrate. Under optimal experimental conditions, the detection limits of the strategy were 17.5 ppb and 1.99 ppm in human urine and gastric juice, respectively. High specificity and selectivity of the SERS strategy were demonstrated using common pesticides and coexisting biological substances. The method was also used to detect biofluids from 5 patients and urine samples from 10 healthy volunteers. The results were in high agreement with spectrophotometric and clinical liquid chromatography-mass spectrometry methods. The volume of urine samples required for this technique is merely 20 µL, and no preparation of the samples is required. Compared to traditional methods used in clinical settings, SERS-based methods are capable of real-time measurements that accurately provide rapid detection and response in non-laboratory settings, with great potential for on-site and point-of-care testing.

Radical polymeric p-doping and grain modulation for stable, efficient perovskite solar modules.

High-quality perovskite light harvesters and robust organic hole extraction layers are essential for achieving high-performing perovskite solar cells (PSCs). We introduce a phosphonic acid-functionalized fullerene derivative in mixed-cation perovskites as a grain boundary modulator to consolidate the crystal structure, which enhances the tolerance of the film against illumination, heat, and moisture. We also developed a redox-active radical polymer, poly(oxoammonium salt), that can effectively p-dope the hole-transporting material by hole injection and that also mitigates lithium ion diffusion. Power conversion efficiencies of 23.5% for 1-square-centimeter mixed-cation-anion PSCs and 21.4% for 17.1-square-centimeter minimodules were achieved. The PSCs retained 95.5% of their initial efficiencies after 3265 hours at maximum power point tracking under continuous 1-sun illumination at 70° ± 5°C.

Rapid and robust analysis of aristolochic acid I in Chinese medicinal herbal preparations by surface-enhanced Raman spectroscopy.

The use of Chinese herbs containing aristolochic acid can induce the exchange of adenine and thymine in gene mutations and even cause liver cancer. To eliminate the harm of aristolochic acids (AAs) to humans, a rapid and robust method of AAs screening is a prerequisite. In this work, a facile and robust Surface-enhanced Raman spectroscopy (SERS) method was used for the qualitative and quantitative detection of AAs in Chinese medicinal herbal preparations based on the mandelic acid modified Ag nanoparticles SERS substrate. Qualitative and quantitative SERS detection of Aristolochic acid I (AAI) was achieved with a good linear relationship ranging from 0.2 - 120.0 µM and a limit of detection (LOD) of 0.06 µM. The proposed method demonstrates a refined strategy for sensitivity analysis of AAs with the advantages of easy operation, time-saving, high sensitivity, and molecular specificity, making it a preferred platform for the screening of AAI in regular inspections of herbal products and regulatory supervision of the supply chain.